How WattToPay estimates EV charging costs
Energy, range and duration
Usable battery capacity multiplied by the change in charge level gives energy added to the battery. Divide by one minus the loss fraction for metered kWh. Multiply battery energy by your estimated miles per kWh for range added. Driving efficiency is a labelled planning estimate and can be adjusted. Temperature, motorway driving and battery health affect actual range.
Power in kW is how quickly the car can charge. Capacity in kWh is how much energy it stores. AC duration uses the lower of the charger and vehicle power limits. DC uses a planning average of 70% of that limit below 80%, and 35% above 80%, to avoid assuming sustained maximum power. These are labelled assumptions, not a measured charging curve; displayed times round up to five minutes. Actual power depends on battery temperature, vehicle charge curve, site sharing and the connection.
Tariffs
Session cost includes metered kWh at the applicable rate and any entered fixed fees. Split-rate estimates use UK clock time, including daylight-saving transitions. For an ambiguous or skipped local start time, choose another time. Enter all fixed fees you know about. Check any separate parking, subscription or idle fees and review charging restrictions with the operator.
Illustrative rates apply to the calculator only. Your entered station rates stay in this page for the visit. Sourced prices use connector-specific OCPI tariff IDs and a captured feed date. Unsupported pricing and stale estimates are shown as unavailable. Status is the provider's most recently reported value and may have changed.
Sources
- 2021 Kona Electric UK specifications and published net capacity are sourced from Hyundai UK and Hyundai technical data. The site lists selected independently extracted specification facts. Check your exact trim and equipment.
- 2020 Volkswagen ID.3 1ST Edition uses independently extracted specification facts from the UK brochure and manufacturer net-capacity figures. The 1ST Edition has 11 kW three-phase AC and 100 kW DC limits; the brochure also distinguishes 7.2 kW single-phase AC. Check the equipment on your exact car.
- Postcodes.io licence and attribution. Contains Ordnance Survey data © Crown copyright and database right 2025. Contains Royal Mail data © Royal Mail copyright and database right 2025. Contains National Statistics data © Crown copyright and database right 2025. Contains NRS data © Crown copyright and database right 2025.
- Open Charge Map, where configured, supplies locations and per-record attribution. Char.gy OCPI coverage is limited to that operator, where enabled.
- The bundled UK location export contains 13,455 public locations from Open Charge Map Contributors under CC BY 4.0. It is adapted from the official 22 April 2026 export. Locations and reported status may have changed. Private, delisted and non-contributor records were excluded. Individual station cards show the source, licence, export date and reported status date. Station tariffs are unavailable in this export.
- Map tiles by OpenStreetMap contributors.
Source review dated 20 November 2026. Individual feeds show their retrieval and update dates where available.
Vehicle coverage and confidence
The catalogue contains 30 makes, 103 models and 254 selected reference variants. Reference years identify the listed version; they are not guarantees that every car registered that year has the same battery. We do not expand a launch year into every later model year. The catalogue is incomplete, particularly for recent releases, optional charging packages and trim changes.
Community references are adapted from Open EV Data, copyright 2024 Tijs Teulings, under its MIT licence with attribution requirement. These are labelled estimates, not manufacturer-certified specifications. Selected primary manufacturer facts are linked from the calculator. We exclude known erroneous records and omit conflicting charging limits. Estimated duration is unavailable if a necessary power limit is unknown. Driving efficiency remains a user-adjustable assumption of 3.7 miles per battery kWh, not a measured claim for each model.
Connected operator feeds
PLUG Charging supplies authenticated free OCPI data, published under the Open Government Licence v3.0. The key remains outside the public document root. ChargePlace Scotland and PoGo Charge publish public OCPI feeds. Contains public charge-point information adapted from these operators under the Open Government Licence v3.0. The information is adapted by joining connector-scoped tariff IDs, filtering public locations and calculating estimates.
PLUG returned 176 locations, of which 174 were publicly displayable, with 174 priceable locations. ChargePlace Scotland returned 1,475 locations, of which 1,341 were publicly displayable and 301 had complete supported linked tariffs. PoGo returned 162 locations, of which 158 were publicly displayable; none of its referenced tariff IDs matched the supplied tariff list at review, so no complete station-linked PoGo totals are calculated. Its separately reviewed published energy rates are explained below. Counts describe the 19 November 2026 review and can change with refreshes. Locations also appear in other datasets; counts must not be added as unique nationwide coverage.
Server feeds refresh on demand after six hours, independent of the owner's laptop, within a shared cache and refresh lock. Failed requests are throttled. A dated local snapshot is a fallback. Tariff calculations require a feed retrieved within 48 hours, but the operator's tariff modification date can be older if an unchanged tariff is still being published. Neither date guarantees real-time availability.
Tariff completeness
Supported flat tariffs contain a single energy price and at most one fixed session fee, with explicit VAT and supported billing increments. VAT-inclusive minimum and maximum session totals are applied. Unrecognised fees, parking-time charges, duration conditions or unmatched tariff IDs prevent a verified total. External parking restrictions may still apply and must be checked on site.
Char.gy coverage is limited to the first 50 successful API records. Later pagination returned HTTP 403; no controls were bypassed. For the exact linked GBP tariff, the missing VAT field is supplemented only using Char.gy's published VAT confirmation and tariff-change notice. Its billing explanation confirms that rates change during a session. We validate a complete weekly schedule and calculate metered energy across UK clock-time boundaries. These rules expire before 26 November 2026; sessions crossing that change are not priced. We do not model the newly announced Peak Pause feature.
Keeping vehicle references up to date
A server-side source check runs at most weekly when the site is visited, independently of the owner’s laptop. It saves a bounded Open EV Data candidate snapshot and digest outside the public document root. Upstream changes are staged for UK variant review: they never silently overwrite reviewed battery values or expand model years. Publishing additional versions requires checking UK availability, usable capacity, optional charging equipment and source licence, then rebuilding the curated catalogue. This deliberately prevents known upstream errors from reaching visitors.
The host also attempts a six-hourly refresh of Char.gy’s first documented 50-record page and tariffs. It deliberately stops at that page; responses of 401, 403 or 429 impose a 24-hour backoff rather than repeated attempts. If access fails, a dated snapshot may be used, subject to the same 48-hour pricing limit and tariff-change cutoff.
Three distinct price sources
Station-linked tariffs are joined by country, operator party ID and connector tariff ID. They are used only when the VAT-inclusive energy charge and compulsory charging fees can be calculated. Missing VAT, unmatched IDs, time-based parking charges or unsupported restrictions prevent a comparable total. A genuinely zero charge is unaffected by a missing VAT percentage.
Where a clear operator publication applies, a separate operator-published tariff may be shown. This is not an individually verified station tariff. Matching requires the identified operator and supported charging type; a shop name alone does not establish the operator. Standard payment prices determine the cost ranking. Free-app alternatives are shown separately with registration conditions. Subscription discounts do not become standard prices.
Lidl’s publication, reviewed 20 November 2026, lists rapid DC at 74p/kWh standard or 59p in Lidl Plus; AC at 55p standard website or 40p in Lidl Plus. Its refundable pre-authorisation hold is not a charging fee. Lidl’s King Street store matches the address of the dated Open Charge Map charging record. Store parking restrictions and opening hours still apply.
MFG’s pricing FAQ and open-data links, reviewed 20 November 2026, state 79p/kWh standard card/contactless and 59p app-exclusive, with no connection charge or subscription. The same page mentions a 69–79p range, so the displayed site price must be checked. Some linked OCPI prices are unlabelled app prices; these are not silently treated as contactless prices.
Operator-published pricing sections are checked at most daily on the hosting server. Verification is extended only when the reviewed section fingerprint and explicit expected prices still match. Changed or inaccessible pages retain their previous expiry, and prices cease being used after seven days without a successful check. Station-linked feed prices expire after 48 hours. All figures use full-precision energy; only the final amount is rounded to pennies.
Your optional reference budget uses your entered tariff. It is not a verified charger price and never determines the cheapest standard-price ranking. Results include compatible locations by default. Uncheck “Include chargers without a price” to show only comparable complete estimates. If none are found, the nearest known compatible options are explicitly shown without a cheapest claim.
Coverage and freshness
Connected sources include PLUG Charging, ChargePlace Scotland, PoGo, MFG EV Power and Clenergy EV. Contains charge point data published under the Public Charge Point Regulations 2023 and the Open Government Licence v3.0. MFG’s connector locations and current published payment conditions are used together. Most Clenergy tariffs omit VAT and are not priced; a small number of zero-energy-charge tariffs are supported. PoGo connector tariff references do not currently match its published tariff objects, so no arbitrary network price is substituted.
The wider Open Charge Map layer remains a dated location reference, not a current availability service. Unpriced locations are optional. AC and DC at the same site remain separate charging choices because their rates and duration differ. Distances are straight-line. Charging totals exclude unknown local parking penalties, overstay charges and access conditions; check signs before charging.
Vehicle and driving estimates
The catalogue contains curated model-year reference versions, not an exhaustive registration-year database. Additional vehicle facts are adapted from MIT-licensed Open EV Data © 2024 Tijs Teulings, with source links and community estimates labelled. No vehicle is selected by default. Manufacturer names are sorted alphabetically. Published gross battery capacity is not substituted for usable capacity. Driving efficiency uses a labelled community consumption estimate where available, otherwise an editable 3.7 miles/kWh planning assumption.
Electricity cost per mile is the estimated session bill divided by estimated miles added to the battery. It changes with the chosen tariff, battery session and driving efficiency. It is omitted where inputs are missing. Duration remains approximate: a simplified power limit and taper model cannot reproduce a vehicle’s measured charging curve.
Manufacturer charging-time checks
Where a selected variant has a published SOC and time example, we scale that average only within its documented battery range and at sufficient charger power. This is an approximate planning estimate, not a measured charging curve. Changing the selected battery or charging limits disables its reference. Outside that range the labelled power-limit and taper assumptions apply. Costs always use metered energy and the tariff, independently of the time model.
- 2021 Kona Electric 64 kWh: Hyundai publishes 10–80% in 64 minutes on a 50 kW charger or 47 minutes on a 100 kW charger; 10–100% AC in 410 minutes at 10.5 kW. For 20–80%, the scaled examples are about 55 and 45 minutes respectively after rounding. A 22 kW AC post cannot exceed this car’s 10.5 kW onboard limit.
- First-generation Kia EV6: 10–80% in 18 minutes on a 350 kW charger; a 50 kW post cannot use this example. The selected 77.4 kWh marketed-pack version uses 239 kW DC and 10.5 kW AC limits from Kia’s European technical specification.
- 2022 MG4 Long Range: 135 kW peak, with a 10–80% example of 35 minutes at a 150 kW post.
- Leaf 39 kWh usable reference: 6.6 kW AC, 50 kW CHAdeMO and a 20–80% example of 60 minutes. Earlier optional onboard equipment is not transferred to unknown variants.
- Tesla Model 3: 11 kW three-phase AC; single-phase supply is lower. No exact manufacturer time curve was established for the selected 2021 RWD variant, so its DC duration remains unavailable. Community estimates for other variants remain labelled.
Map accuracy and payment conditions
The optional map loads only when requested. Pins use the actual source location coordinates; the blue postcode marker is the search origin, not a charger. Connectors with the same source location ID share a pin, with AC/DC choices in its popup. Clusters expand as you zoom. Map and list use the same filtered compatible results, capped at 60 charging choices; the list initially shows six. Sources can duplicate a physical site under different IDs. Neither pins nor reported status guarantee current availability.
InstaVolt publishes 92p/kWh contactless at all locations 24/7. Its app/RFID 55p off-peak rate applies to sessions started 20:00–07:00, with account conditions; we do not quote an app total where prepaid/validation conditions make that misleading. Standard terms describe temporary card reservations, distinct from the bill.
Fastned publishes 79p/kWh UK standard direct payment, with a free 10% app discount (71.1p) only for direct app payment. Third-party card fees and paid subscriptions are excluded. Card reservation amounts appear on the charger screen.
Reviewed 20 November 2026. These are operator publications applied to identified dated source locations, not live station-linked feeds. Osprey and GRIDSERVE advertise site-dependent DC prices; no generic price is assigned. Other operators without a complete free linked tariff remain unpriced. Payment holds, parking and account conditions appear under Price details and do not silently increase the energy bill.
Latest map and pricing checks
The map starts around the closest locations and the lowest standard complete estimates, with a Show all locations control for the full filtered search. Unpriced locations remain included unless you turn them off. The map waits for its visible dimensions and responds to resizing. Pins use embedded vector artwork rather than external marker-image files. HTML, CSS and the complete JavaScript import graph are versioned and revalidated together.
PoGo’s current publication lists 56p/kWh AC and 65p/kWh DC. Clause 5c of its terms confirms that published amounts include VAT and banking charges, but clause 5e permits site supplementary charges. For current identified PoGo OCPI locations we therefore show an energy-only estimate, not a complete comparable bill. These estimates never determine the cheapest complete charging option. Parking, reservation and overstay fees must be checked at the site. Unmatched feed tariff IDs are not silently repaired by borrowing another station’s tariff.
Osprey publishes standard prices and site exceptions. Its public web-map destination currently redirects to app information. A current applicable tariff for The Range Retail Park, St Helens was not independently established from an authorised site-linked source, so its cost remains unavailable. The same applies to Queens Park Sports Centre: council location and historical usage information do not establish a current charging tariff.
The government’s Public Charge Point Regulations guidance requires free machine-readable reference data, including prices. Some providers require access requests, and published feeds can still contain unmatched identifiers or unsupported fees. No access controls are bypassed. Zapmap’s data is not reused: it describes its own CPO integrations and enriched business APIs, which are not a free redistribution licence for its database.
What each price category means
Station-linked: the operator’s location, EVSE and connector identify a tariff using its country, party and tariff IDs. VAT, supported fees and payment type are retained. Published operator rate: an attributed official publication applies under reviewed operator and connector rules. Neither category guarantees a charger is working.
Partial estimate: known energy and fixed session costs are shown, but parking, eligibility or other costs remain unresolved. These estimates never enter cheapest-price ranking. Indicative network guide: an official network rate or range is useful context, but its application at this exact site is unverified. We show no session total or cost per mile from a guide. Unavailable: no supported current price basis is connected.
GeniePoint’s official open locations and tariffs requests use a six-hour shared cache. Hosting retrieval is currently unavailable; a genuine dated downloaded snapshot is shown instead. Its prices expire after 48 hours without fresh data. A compliant access route has been requested from the operator. Tariffs join to exact connector IDs, with ad-hoc card payment kept separate from regular RFID prices. Explicit zero-cost components are supported; positive parking/idle charges are never silently discarded. Conditional parking estimates and RFID-only prices remain partial. Operator modification dates are shown separately from retrieval dates, since a current download can contain an older tariff.
Osprey’s network guide includes contactless pricing and the published weekday, weekend and overnight app windows. The Range Retail Park’s site-exception status is unconfirmed, so the guide does not become a verified site total. No current applicable Queens Park Sports Centre tariff has been established. Historical contributor notes or another network’s rates are not used as substitutes.
Indicative Osprey, Be.EV and GRIDSERVE guides use a daily, bounded publication check. Only an unchanged reviewed pricing section extends verification; changes or failures retain the previous expiry, and guides disappear after seven days without successful verification. The feed and guides are fetched on demand and share server caches; there is no background visitor tracking or paid data fallback.
Regulation 10 and official guidance underpin requests for free machine-readable locations, connectors and tariffs. The guidance describes reuse under the Open Government Licence and permits conditions governing API access. Required credentials and rate limits are respected. Zapmap’s own enrichment and partnerships are not a licence to copy its database.